Authenticity of Oakley Sunglasses
Oakley’s glasses are not cheap. If you are looking for an agent to buy, you must be vigilant. It is not worthwhile to spend so much money on a fake Oakleys. We must master the method to distinguish Oakley Sunglasses.
Look at the appearance of the glasses case
The authentic Oakley glasses case is made of smooth materials, fine and uniform texture, and fine workmanship. The texture of the imitation glasses case is relatively rough and loose, especially the workmanship is far from the original one, and there will be burrs or threads.
Look inside the glasses case
The loss-proof sponge lining inside the cover of the authentic glasses case is made of high-temperature integral compression molding, with good elasticity, fine and uniform cotton foam, and smooth edges. The damage-proof sponge lining of the imitation product here is not integral, and the cotton foam is loose and elastic. The glasses groove in the genuine glasses case is neatly cut and the gap is moderate. And the glasses can be completely stuck in it after being put in. Even if the glasses case is upside down and the original attached lenses will not fall off, to ensure that the glasses are frictionless during carrying. The imitations are just a few simple foam pads.
Look at the logo
The authentic temples and lenses have a strong sense of transparency. The logo is long and narrow, and the mosaic fits perfectly. In comparison, the fake logo is closer to an oval shape. What’s more, the inlay is not perfect, and there will be burrs.
See glasses nose pads
The rubber of the nose pads of Oakley Sunglasses is soft and smooth. It will not rub the bridge of the nose to cause discomfort. Also, it fits the lower frame of the glasses highly. The rubber at the imitation nose pads is relatively hard, which will cause discomfort when worn for a long time.
Look at the screw
The fixing screw of the genuine glasses is a special screw that mimics the slippage and prevents loosening of the six-slot plum buckle. The replica Oakley sunglasses screws are just ordinary four-slot screws.
Look at the temples
The distance between the two temples of the authentic Oakley glasses is relatively wide, which is approximately equal to the average width of most people’s skulls, and is comfortable to wear without feeling of pressure. The distance between the knockoff Oakleys temples is much narrower, and it will feel oppressive if you wear it longer. Since OAKLEY’s image is only in the scope of sports and leisure, world-renowned athletes are proud to use OAKLEY products to protect their eyes.
How To Spot Fake Oakley Holbrook Sunglasses
In 1975, American scientific madman Jim Jannard started Oakley with $300. From the development of new motorcycle handles to highly technological optical sunglasses, Oakley has always been at the forefront of technology. Many extraordinary creative designs and new technology applications in Oakley glasses. The High Definition Optics technology invented by Oakley has clearer vision and 100% UV and glare isolation, while having strong impact resistance. Oakley waterproof lens coating has the function of eliminating static charges, does not absorb dust, and has an excellent protective layer against sweat, oil, and skin care products. Many high-performance advantages make Oakley glasses a standard for US special operations forces.
The packaging details of Oakley Holbrook glasses are shown in the picture above. Glasses, paper boxes, dust bags, instruction manuals and genuine warranty cards are standard, but not all glasses cases are available.
The packaging carton of fake Oakley sunglasses has different printing patterns for different styles. Here, you must check whether the printing quality of the packaging box is clear and whether the brand logo and description match.
Packaging carton labels for Oakley Holbrook sunglasses. All boxes should have a white label on the side, with two different barcodes and detailed information such as the style and color model of the corresponding glasses. It should be noted that the detailed information should be consistent with the physical glasses and instructions.
Dust bag is the standard configuration of Oakley Holbrook sunglasses. Different sunglasses have different patterns, but the same is that the surface is smooth and the hand feels delicate. Note that the routing of the dust bag should be neat and delicate. The label should have Oakley’s oval O logo or HDO logo. Also, the embroidery logo should be clear and delicate, with correct patterns.
Fake Oakley Holbrook Sunglasses VS Real
1. Check the packaging and country of origin. All fake Oakley Holbrook sunglasses are made in the United States, so the box and information brochure should be stamped “Made in the United States”. The counterfeiter is obviously trying to imitate this, but you can usually tell from the pattern of the letters. And the consistency can be seen in both the box and the brochure. The suitcase has a zipper, which is made of a hard material similar to fabric but a combination of plastic and other materials.
2. Check the frame. Oakley frames have several distinctive features that guarantee creativity. The most important is the iconic “O” on all Oakley products.
Authentic Oakley Holbrook sunglasses have an “O” on the temples instead of etched or engraved inscriptions. Inside the arm, you can always find the SKU, which is the identification number of the frame (newer Oakley frames have a longer SKU, starting with a double “O” instead of zero).
After that, there are four numbers, a dash, and two other numbers-cross-reference it with the serial number on the box.
3. Check the nose pads and lenses. Check the rubber nose bridge. The real frame should feel soft and spongy, while the fake Oakleys feels hard and smooth.
The overall quality of the nose bridge may be a good way to prove authenticity. Oakley ads have etchings and inscriptions on the lenses, so you can tell if Oakley sunglasses have these features or spelling errors, and if they are fake.
How To Identify Fake Oakley Jawbreaker Sunglasses
In order to uncover the mystery of fakes, I specially selected an object that is closely related to riders’ riding, trying to show the so-called “cost-effectiveness” of fakes. And then explore whether the money spent on genuine products is worth it.
Oakley JAWBREAKER has been very popular since it was launched. It can be seen from top races such as Tour de France and Giro d’Italia, to cycling activities for self-entertainment. Oakley JAWBREAKER, the shape of full sense of science and technology, breakthrough all-enclosed design. The explosive JAWBREAKER is selling well in major online stores, and some stores have amazing transactions. What are the characteristics of these fake Oakley JAWBREAKER?
First of all, in addition to the same color scheme as the official Oakley, manufacturers are even more ingenious, launching many color schemes that are not even official. Many people feel sorry for Oakley, “If only you had so many colors”. Knockoff Oakley JAWBREAKER lenses are engraved with “PRIZM” in the lower right corner. Could the Oakley PRIZM lens also be compromised? So apart from the color, what difference will these knockoffs have from the original products? Is there any difference between fakes from different manufacturers?
With these questions, I deliberately bought a pair of Oakley JAWBREAKER (white and black color matching + PRIZM lenses), and bought the fake same-color glasses called “TP90 Ultimate Edition” and the normal PC version of the fake same-color glasses. At the same time, in order to understand whether there are differences in products from different manufacturers. I bought the “TP90 Ultimate Edition” glasses from another store as a reference, and chose different colors for comparison.
Unpacking
▲From the appearance of the packaging box, the biggest difference is the size. The authentic JAWBREAKER box is smaller than the previous product packaging. The manufacturer has reduced the number of replacement lenses included, so there is no need to use an oversized box.
▲When fake Oakleys are copied even with barcodes, consumers really have to keep their eyes open and distinguish them. Fortunately, the paper material and printing quality of the fake outer packaging are always a bit poor, otherwise. It really has to be fooled.
▲The Oakley JAWBREAKER only has one pair of lenses, so the size of the soft shell is much smaller. The content consists of glasses, cloth bag, soft shell, manual, elevator, and replacement nose pads. The overall configuration is slightly “shabby” compared with the previous products. .
The cottage here seems to be like KFC’s family bucket. There are not only three replacement lenses, but also manuals, replacement nose pads, cloth bags, and glasses wipes. There are even postcards to thank you for buying. I really don’t know what to say. Well, just in terms of the richness of the configuration, the cottage is “kind” enough, no wonder some car friends feel that buying a cottage is “happy” than buying a genuine product.
▲However, more configuration does not mean good quality. Looking at the manual, the printing quality on the left (cottage) and the right (genuine) are pale in comparison, rough and toothy.
Frame Differences
▲Looking at the frame alone, I believe that many people find it difficult to distinguish between genuine and counterfeit at a glance. According to the standard of GB/T14214-2003 “Basic Requirements and Test Methods for Spectacle Frames”, by visually inspecting the appearance of spectacle frames without the aid of a magnifying glass or other similar devices, you may be able to find the true difference between the fake and the genuine.
▲The genuine logo has a metallic luster, slender ellipse and sharp edges and corners. This is the high-quality workmanship that a genuine product should have.
▲The color of the high imitation logo is relatively dim, and the oval logo is slightly bloated. I have to say that the high imitation models in the cottage have also worked hard. The O mark of the aviation aluminum alloy logo is not low in cost. If you have the money, do it yourself What a good brand.
▲The high imitation of another manufacturer also has the same problem, and it has been scratched before use
Logo Color
▲The difference between genuine and counterfeit products on the temples is relatively small. Even the width of the seams that test the accuracy of the mold is controlled fairly uniformly. However, the plastic material still mercilessly betrays the identity of the counterfeit. What’s wrong with Kung Fu”.
▲The internal logo reveals the differences in the molds of the counterfeit products. The authentic (top) JAWBREAKER logo is clear and unobtrusive, but the high imitation product appears a bit “excessively”, too sharp and too prominent. The low imitation product is limited by the material, which is jokingly called the “white marble” material (the editor Nikon D750 is embarrassing that it can’t match the focus…). In addition, the position of the buckle screws for the adjustment of the temples is quite different. Such as the genuine screws are better hidden, and the high imitation ones even stick out, which makes people wonder whether they will come out during use. In addition, there are also differences in the workmanship of the joints between the temples and the mirror body, and there are even “nozzles” in the high imitation products-indicating that the processing of the plate is very imprecise.
▲Genuine temples have limited fittings so the lenses do not wear out when the temples are closed. The fakes do not have this device. When the temples are closed, there is still room for movement. The end of the temples will touch the lens, and long-term wear will reduce the lens. life.
▲The quality of genuine screws is relatively good, while those of counterfeit screws have different specifications and shapes, which makes people wonder whether they will fall off due to their durability.
Workmanship
▲The locking buckle more intuitively reflects the difference between the genuine and the fake. The metal buckle of the counterfeit product is darker. Although the counterfeit product is very close to the original in metal material. And the metal paint has a heavy feeling and layer Sense can never match the genuine product.
▲The locking mechanism reflects the frame material of the copycat. Compared with the genuine product, the locking buckle of the copycat product feels hard and obscure, and it often happens that the card does not enter and the card is not tight.
▲ Equipped with a sponge pad to protect the lens, it is another notable difference of the original product. While the cottage products do not have this pad, and the wear of the lens is just around the corner!
▲The workmanship of the temples shows the lack of “sincerity” in the counterfeit products. It is not an exaggeration to describe the shoddy products. The temples are made of brittle materials with burrs, and the rubber is very hard. Wearing something soft and sensitive to the back of the ear Skin, the consequences of long-term wear are disastrous.
▲The authentic product is engraved with L and R on the temples to distinguish the left and right. Although the eyes are not good enough to distinguish the left and right of the temples. But the sincerity of the authenticity can still be felt in the details. The temples are soft and tough. The non-slip rubber is soft and skin-friendly. Based on this, the editor wanted to throw the cottage Oakley out of the window, but after thinking about the follow-up evaluation, I had to give it up.
Frame
▲Strictly speaking, the biggest difference between a genuine product and a copycat is the material and feel.
In terms of material, the genuine Oakley uses self-developed O Matter memory plastic. This material has the characteristics of safety, non-toxicity, light weight, durability, and high elasticity. In actual use, the frame texture is relatively solid, and there is no light “plastic” sense”. The copycat product claims to use TR90 material. TR90 material is also a polymer material with memory function. It is ultra-light, ultra-tough, and chemically resistant. It is more suitable for use as a frame. Unfortunately, the surface treatment is relatively rough. There is always a lingering feeling of cheap plastic in the hand,
▲The Oakley uses Switchlock technology to quickly open the frame and replace the lens. Although the counterfeit product also uses a similar structure, the main body material and bearing of the mechanism are quite different from the original one, so the hand feel is not good. There are differences in specifications of lenses from different manufacturers, making it very difficult to change lenses.
Summary
▲Genuine Oakley Unobtainium non-slip rubber temples and nose pads enhance the grip and comfort of wearing, and reduce skin irritation. The nose pads and temples of counterfeit products have rough workmanship. And it is not clear which material they use. It is also worrying whether the pores of the unexplained rubber will release toxic substances after sweating during exercise.
▲The treatment of spherical joints can also show the attitude of genuine products and counterfeit products. It is also the main factor affecting the experience of use.
▲Through experiments, a problem unique to counterfeit products emerged. It is that the frame could not be closed naturally. It may be embarrassing caused by the elasticity of the materials used in counterfeit products and the tolerance of the mold.
▲Therefore, every time oakley replaces the lens, it must be “straightened” with great power.
▲In terms of weight, the knockoff Oakleys won, but it was not glorious to win by cutting corners.
How to Spot Fake Oakleys
These are some general rules in spotting replica fake oakley sunglasses. If you’re trying to find model-specific guidance, please scroll to the rock bottom of this text and inspect the link.
We’ve taken these information from a variety of sources and thanks to them we can share it with you.
Check the worth
The price of Oakley is $100-$500+, so if you’re seeing new Oakleys are selling for $20-$30, they’re 99% knock off Oakleys. It is possible to find out fake oakley sunglasses on sites like eBay or the Oakley Forum Exchanges, but you’ll want to try to do your homework before buying a pair of cheap fake Oakley sunglasses.
Check the spelling
It is a simple one, but does anyone think Oakley would spell their own name wrong? Whether its “Oakly”, “Oakely”, “Oakey” etc., the lower end fakes often have misspellings within the title. It is usually a dead giveaway to show around and run!
Check they exist
This term is employed by fake Oakleys collectors to explain the terrible fake Oakley sunglasses that never even existed! A fast Google search will tell you if Oakley ever made the model you’re close to buying.
Look up the SKU
Often Oakleys have a Serial or SKU (Stock Keeping Unit) number on the within of the arm stems. These numbers usually start with OO on new pairs, followed by alphanumeric codes, like OO9999-99. On older and vintage couples, the SKU/Serial number may be a sign of numbers separated by a hyphen like 99-999.
Beware the sticker
Beware of large stickers on your lenses. Polarized Authentic Oakleys may accompany a little P sticker on one glass, but there are rarely other stickers on the lenses. Those lenses are Oakley’s pride and joy – they don’t want to mess with them. Generally, the legitimate labels will only inform you about the glasses information, usually differentiating them from standard ones.
Inspect the ear socks
Usually, on fake Oakleys, the ear socks are thinner and should slide on and off very quickly. They are made by cheap plastic. Additionally, you’ll notice a niche between the frame and the ear socks due to the misaligned parts. On fake Oakley sunglasses, it’s not uncommon for the ear socks to be poorly cut and not fit for the structure.
Notice the dimensions
Fake Oakleys could also be smaller than real ones. Not surprising that the people trying to scam you and they would like to save lots of materials. The replica fake oakley sunglasses are significantly smaller than the authentic pair on the proper. If you’re buying a pair of Oakley, which are much lower than you previously remembered, this might be the reason.
Never made by Oakley
It might sound pretty basic, but not everyone knows the entire line-up of Oakley. They see a pair of sunglasses and they just like them. They see it’s the Oakley logo, and assume it’s real. Oakley has some pretty exciting sunglasses styles. You can run a picture, then search and see what comes up. If they don’t crop up on any legitimate sites, they’re fakes.
How To Identify Fake Oakley Sunglasses
In 1975, Oakley was co-founded by Jim·Janard and basketball star Michael Jordan. Since its inception, Oakley has been producing cross-country racing goggles for the mainstream. After many years of design, production and market demand experience, they use high-tech technology to create a series of high-performance fashion glasses. Up to now, Oakley represents a young, comfortable, but also a never-ending spirit. The Oakley sunglasses always on the road of development and innovation.
Because of this, people’s love for the brand has led to the emergence of a large number of fake Oakley Sunglasses on the market. Therefore, we must learn How To Identify Fake Oakley Sunglasses.
How To Identify Fake Oakley Sunglasses? Can carry on the discrimination of true and false basically from the following a few respects.
First:Look at the outside of the case
Genuine Oakley Sunglasses case with smooth materials, fine texture uniform, fine workmanship.The texture of the imitation glasses case is relatively rough and loose, especially the workmanship and the genuine products have a big gap, there will be rough edges or thread.
Second:Look inside the glasses case
The sponge lining inside the lid of the genuine sunglasses case is made by pressing and molding at high temperature, with good elasticity, fine and even foam and smooth edges.Imitation here damage – proof sponge lining is not the whole, and the foam loose, poor elasticity.The glasses slot in the genuine glasses case is cut neatly and the gap is moderate. After the glasses are put into the case, they can be completely stuck in it. Even if the glasses case is turned upside down, the sunglasses and the original complimentary lenses will not fall off, so as to ensure that the glasses have no friction during the carrying process.The imitation is just a few pieces of simple foam pad.
Third:See the logo
Authentic glasses legs and lenses have a strong sense of permeability, logo long and narrow, inlaid fit perfectly. Compared with the fake logo, it is closer to the oval shape, and inlaid is not perfect. There will be rough edges.
Fourth:Look at the nose rest of the glasses
Genuine Oakley Sunglasses nose bracket rubber soft smooth, will not rub the bridge of the nose and cause discomfort, and sunglasses lower frame height fit.Imitation nose rest of the rubber is relatively hard, wear for a long time will have discomfort.
Fifth:Look the screw
The fixing screw of the genuine glasses is the special screw for preventing the release of the imitation slip of the six-slot plum blossom buckle.And the imitation screw is just a common four groove screw.
These are some techniques for identifying fake Oakley sunglasses. But in addition to mastering these techniques, going back to the source to avoid buying fake Oakley sunglasses. Such as on Oakley ‘s official website and in authoritative official stores.
As an innovative fashion brand, Oakley ‘s obsession with innovation is exactly what we appreciate about it. Therefore, we should respect Oakley brand itself and stay away from imitation.
How to Spot Fake Oakley Sunglasses
Oakley sunglasses are both functional and fashion with excellent texture. However, with the Oakley moving into the big market, there are lots of Fake replica Oakley Sunglasses from this market. Let me share some simple ways of how to spot fake oakley sunglasses with you.
Look at the sunglasses case
Real Oakley case is made of smooth material with fine and even texture, but they did not have any labels/bar codes on the outside of the case to identify what is inside the case. The fake Oakleys case is relatively coarse, appearing loosely. What’s more, the fake oakleys has bigger gap, compared with genuine one, which can exist burr edge or thread head. Although they have Oakley logo on their cases, they looks grainy and low resolution.
Look at the sunglasses bag
The genuine Oakley sunglasses bag is made of thick material, fine cloth texture and uniform color. The stitching of the sunglasses bag is marked by Oakley HD optical technology. However, the fake products generally do not have such high-definition optical technology labels, and only have simple printed labels on the bag body.
Look at the quality of the sunglasses
Check the quality and weight of the framework. The real Oakley is made of high quality and durable metal and plastic, so they looks textured. The matiral of replica Oakleys appears cheap and light.
Check the”Made in U.S.A” logo
The real oakley sunglasses logo should be found on the inside arms of the frames.It can be either painted, engraved or molded. Original Oakley Sunglasses are manufactured in USA only, not in China or Taiwan.
Check the “O” logo
The real Oakley sunglasses legs and lenses are transparency. The logo is long but narrow, and the mosaic fit perfect. Compared with the original Oakley logo, fake one is closer to the oval shape, and the inlay is not perfect. There will be rough edges on the logo.
Check its legs
The genuine Oakley sunglasses have a wide spacing between the right and left legs that is the average width of people’s skulls, which makes them comfortable and unpressurized. The copy lens leg spacing is much narrower. Long time wearing will increase pressure.
After the above common sense of real Oakley and fake Oakleys comparison, are you more confident in identifying Oakley sunglasses true and fakes? As long as you can contrast carefully, no matter where you buy Oakley sunglasses from, it should be easy to distinguish the real and Fake replica Oakley Sunglasses through the above steps.